This board is based off the mid-eight foot balsa Quiggs. The template is right-on, ditto the bottom contour and thickness distribution. I've made the rocker somewhat friendlier. It carries what I call "golf ball" rails; I reduce the volume going into the rail, then round it out. This way you lose the cork, but get a very forgiving and neutral rail. This one is at the Mollusk in Venice- there's another at Val Surf in NoHo.
This one is 8'6 x 3", 16 x 21 5/8 x 16.
I've set the box well back, at 3 1/2" off the tail block. This accommodates either a correctly placed "D" fin, or an upright rectangle, such as the 10" Lightweight shown below, for a snappier ride. The bottom of the board has good roll throughout, with a flattened speed zone in the nose.
Mike Kelly's Kandor construction as told by Mark Lightcap - very proud of my friend Mr. Lightcap
3 weeks ago