9'2''SON OF SAM PHD

9'2'' SOS

Was down at Mollusk Venice yesterday and sold this to a nice guy.

It had one little 1/4 shatter on the nose so I said would fix it .

So took a few pics, fixed ,waxed, and ready to trim your life away.

PUTNAM/HILBERS

3 of my favorite boards, 9'4'' SOS , 8'4'' PR 68 and 7'6'' VEINTO.

These have been refined over many years by myself and Matt Miller, with influence by Nat Young , Wayne Lynch, Ted Spencer, Greg Liddle, Greenough, Paul Gross and Brian Hilbers.

The 7'6'' and 8'4'' and made for all types of surf, good in beachbreaks , reef and points, they both have a rolled V under your back foot with the last bit behind the box going back to flat for punch. I love them in junk surf. The SOS 9'4'' is a long quest for the ultimate Yater Spoon type longboard hull, step back on the hip, up to the trim spot and hold on. These all have a certain size range that Brian and I have figured out for customs. ? kirkripper@yahoo.com

Sacred Craft in Ventura

Scott Bass put on another fine show in Ventura. It was great to see all those spoons, since it was Rennie's weekend.
As they used to say in Mad Magazine, the usual gang of idiots manning the booth. I don't know where Scott Anderson was when I had the camera out. The big vibe was still about the Hot Generation- that board is going places. I'm working now
on a Little Hot- the same treatment, but around 7'0.
The Boss.

Stringerless MP (almost)

Surfblanks America cooked me up this blank, and, since I personally know the MP really well, I used it for one, shaped as close as makes a difference to my old trusty 6'3 MP.
The idea is to have a really rigid, positive fin response, while the board can flex and rebound during true hull turns- pretty much emphasizing what I want an MP to do, anyway. Glassed with one layer, top and bottom, of 6 oz. Volan flatweave. An excellent job, by the way, by Gino at Aqua Tech- not a trace of twist.

Here's a close-up of where the stringers end. They taper, by the way. That's a Paul Gross 9.0 that's in the box. While I normally like a bit more base, with consequently more drive, I've heard on the Old Boy network that this fin really works well in MPs, so I'm gonna give it a try. Eat your heart out, Sam George!

The Tombstone

The newest addition to the twin fin lineup. While it looks superficially similar to the P-38 and Richard Kenvin's Caspers, it has a lot off different stuff going on, mainly in the rocker. Think skateboard for the water- really pumpable, with a lot of front-to-back weight shift potential. The front end still has a genuine, deep-entry hull, but it's mainly there for wave entry and trim line, rather than to turn off of. Fuller rail volume for a poppy, lively feel.
Notice the fins are a lot farther forward- also a new template, with a one-side foil. Both more hold, and more slide potential, depending on how you weight on 'em. More user control, either way.
This one pictured is 5'0 X 22 3/4". They don't have to be this small, but you get the idea.

2 FOR SACRED CRAFT SHOW

8'4'' custom Hot Generation for Flo

Good feedback on everyone who's got one so far.

Surfblanks America blank , Volan glass.

9'2'' Spoon, this a combo of Son of Sam template and Jaws type foil very thin foil . I loaned the original to Kopps for a recent trip and the Guys all went nuts on it.

Dubed it the Anaflexia Spoon. Everyone come by the Sacred Craft show and say Howdie, the Yater tribute will be very cool.

8'2'' PHD 68/PR

Oldfart railgrab by KP, this is on my own 8'4'' PR brian made me , this has really been fun as of late,my goto board. I was tryin to stay close to the Green for St. Patricks day.

The PR stands for Puerto Rico 1968 World Contest, Wayne Lynch, Nat Young and Ted Spencer had been in Europe filming Evolution and shaped these type of boards for the contest

This one is a 8'2'' just like mine

Easy to ride on your backside with that hip and not to wide on the nose, good in beach breaks also, has a rolled V under your back foot . Good in junk surf also.

The 8'2'' and my 8'4'' more info kirkripper@yahoo.com

NEW ONES AT MOLLUSK SF

8'4'' Hot Generation Putnam/ Hilbers/ Design

9' 4'' SOS , PHD these 2 are what Brian and I have been workin on, Ive been riding and refining these 2 for more years than I care to remember.

These are pulled from Children of the Sun from N.Z., this one is Wayne Parkes , tryin to show this era just went by too fast. Its great to go back and refine these boards with better rockers , foils and fins = FUN !

The great N.Z. surfer/ shaper Alan Byrnes on a SOS type design. I had some of his great 6 channel Burning Spears guns in the 80's, good stuff. Any ? about the boards .... kirkripper@yahoo.com

My Little Bastard

This is my new personal Little Bastard. I made it a bit big, 6'3, to match the size of my beloved MP, so I can make a head-to-head comparison of the two.
Very MP-like, but it carries the Bad Acid bottom through the hull (you can just see the double concave in the pic below). Also, it has a taste of tail kick, coordinated with the front fins. Notice it's a widowmaker setup, 2+1, rather than the in-line 1+2 of the MP and GeeBee. Also, a new dedicated sidebite template, in Volan, made for me by Larry at Fibreglas Fin Co. One of the new PHd flex templates by Marlin at 101 in the middle. This is the hooky guy, the BJ/Foley, that really throws some good punch in the MP.

JOHNNYS HOT GENERATION

Brian and Johnny been thinkin about this for awhile.

8''4'' its like the one Brian and I did for Sacred Craft in SD, just a bit thicker for him.

Made to turn off that hip and trim up toward the front.

S-deck , not to much V so it wont track.

''Senior Johnny'' is back workin over at Mollusk in Venice , thats a good thing . Also my new neighbor .

P-38 SIGHTING

The OG p-38 this was one of those boards that just came together really well.

Hull.

Brian made those fins and they really flex at the tip.

Mikey or Warm jet , not sure.

I love that wosh feeling right when you exit a pocket.

8'4'' PHD PUERTO RICO 68

Brian shaped this for me its a design Ive ridden since 1994, its like the boards Wayne Lynch , Nat and Ted Spencer rode in Evolution and the end of the film the Hot Generation. This is one of my favorite boards, it works in a lot of waves , points , beachbreaks, junksurf allaround user friendly hull.

The template has alot of curve and the rocker is relaxed just a bit in the right spot so its works really well backside.

Lots of foam on the S- deck, paddles well for an 8'4''.

The nose is slightly pulled and that curve in the back really helps the board go from rail to rail, also a rolled V right in front of the fin box , this board solves alot of problems with bigger hulls.

Very Small, and not so Very Small

This is a new ride for Tim Caton, down SD way- a 4'11 Paipo, shown here on top of a GeeBee for scale. It's around 21 1/2" wide, 1 3/4" thick. More or less a Velo tail- I used a GeeBee nose template, rather than the rounder Velo, to reduce spray flying into his prone mug. In spite of the thinness, we'll just have to wait and see if it flexes much- it's mighty short.



This is Eric's 8'0 Microant- it's going back home with him to Byron Bay. Nick's authentic GeeBee-looking GeeBee is in the background.